home *** CD-ROM | disk | FTP | other *** search
- Path: nuscc.nus.sg!isc30236
- From: isc30236@leonis.nus.sg (TAN TOT LIT)
- Newsgroups: comp.dcom.modems
- Subject: Re: Motorola Power 28.8 & busy signals
- Date: 15 Feb 1996 00:12:35 GMT
- Organization: National University of Singapore
- Message-ID: <4fttpj$fgo@nuscc.nus.sg>
- References: <4f0alo$i4n@columbia.cs.ubc.ca> <9602070147.AA23343@indep1.chi.il.us> <Pine.A32.3.91.960206213800.61920A-100000@hopi.gate.net> <Pine.SOL.3.91.960207075203.13733E-100000@lonestar.jpl.utsa.edu> <4fb8u5$2dhm@seminole.gate.net>
- NNTP-Posting-Host: isc30236@leonis.nus.sg
- X-Newsreader: TIN [version 1.2 PL2]
-
- Fred Leggett (fleggett@gate.net) wrote:
- : In article <Pine.SOL.3.91.960207075203.13733E-100000@lonestar.jpl.utsa.edu>,
- : Daniel Scott <dscott@lonestar.jpl.utsa.edu> wrote:
- : >
- : >That AT&F is the source of your problem. AT&F tells the modem to use the
- : >factory settings rather your changed setting. You can change settings
-
- : No no, I'm issuing ats11=50 *subsequent* to the issuing of at&f.
- : I tried it again after disconnecting and I'll be damned if it didn't
- : work. Needless to say, I am *extremely* perplexed. It is possible I was
- : trying to specify values that were too low for the modem to accept (the
- : 1496e+ I was previously using would accept a value of 40), but I
- : sincerely thought I had tried values in the range of 50-79....
-
- Min val for the power is 50.
-
- --
- ~Frisky Kitty~
- !*% T-3..............T-2.............T-1.............BOOM.....................
-